China High quality 8 port 1000M POE switch Quotes, Factory, Purchasing, Manufacturers
Home > Products > POE Ethernet Switch > 8 port 1000M POE switch

8 port 1000M POE switch

Brand : TAKFLY

Product origin : China

Delivery time : 3-7 Days

Supply capacity : 2000,000 pcs/Month


8 port 1000M POE switch is a 10-Port Gigabit PoE Switch with 8 PoE Ports, 2 SFP Gigabit Uplink Optical Ports, port 1 to port 8 supports PoE IEEE 802.3at international standard, each port power is 30W. Total power is 120W.

8 port 1000M POE switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 8 1000Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.

Typical applications please refer to following picture


No Frame Loss IP Data Transmission

PoE+ Standard 250m in One-key CCTV Mode

10 KB Jumbo frames support

Few video time delay

4KV Lightning Protection


10-Port Gigabit PoE Switch with 8 PoE Ports, 2 SFP Gigabit Uplink Optical Ports.

8 port 1000M POE switch Supply power to wireless access points AP and network IP surveillance cameras.

Port 1 to Port 8 supports IEEE802.3at power (each port maximum power is 30W).

Port features with auto-flip(Auto MDI/MDIX).

Network port comes with lighting-proof.

All ports support wire-speed switching, frame size within the range of 64 to 1536 can achieve wire-speed.

Automatic adjustment, plug and play, no need software and protocol conversion.


IP Security Cameras

VoIP Phones

Wireless Access Points

Network Routers

Network Webcams

Industrial devices such as meters, sensors and controllers

Access control using electronic entry cards

Remote Point-of-Sale kiosks






Power Supply

Power Supply Mode

Mains on load

Voltage Range

AC 100240V

Power Consumption

The device <5W POE power supply <120W

Network Port Parameter

Network Ports

18 Ports: 10/100/1000Mbps Ethernet port, adaptive control

Uplink 2 SFP:1000Mbp

Transmission Distance

1~8 Ethernet Port:0~100m

Mandatory 10 Mbps reach up to 250m

2 SFP: According to different SFP

Transmission Media

1~8 Ethernet Port:Cat5e/6 standard UTP cable

2 SFP: LC interface optical fiber

POE Agreement

IEEE802.3 af/at standards

PoE Power Supply Mode

End-span method

PoE Power Supply Wattage

Each port≤30W,Whole device<120W

Network Switch Specification

Network Standard

IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T

Swap Mode

Store-and- forward

Switch Capacity


MAC Address List


Status Indicators

Power Indicator Light

One power light (green)

Optical Fiber Port Indicator

One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data

PoE Indicator

1~8 PoE indicator light(yellow)

PoE Network Port LED

1~8 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data


Switch 1(Vlan)

ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port; OFF: Vlan close, normal status

Switch 2(CCTV Mode)

ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port, power and data can reach 250 meters;

OFF: Vlan close, normal status

Protection Level

Surge Immunity

Level 3, executive standard:IEC61000-4-5

Electrostatic Protection

1a touch electric discharge: level 3 1a Air discharge: level 3 Executive standard:IEC61000-4-2

Operating Environment

Working Temperature


Storage Temperature




Mechanical Attributes

Dimensions (L*W*H)







Mean time between failures (MTBF)


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :